The
5A05 marine aluminium is an Al-Mg rust-proof aluminum alloy, which cannot be heat-treated and the cold deformation of the alloy can improve the strength. The plasticity in the annealed state is high, and the plasticity in the semi-cold hardening state is acceptable. The alloy has good corrosion resistance and good weldability, and is suitable for spot welding, atomic hydrogen welding, gas welding, and argon arc welding. Its machinability, semi-cold hardening state is still good.
Performance advantage
1. The cold deformation strength of
5A05 marine aluminium is high, the plasticity in the annealed state is high, and the strength is low, and the corrosion resistance and weldability are good;
2, semi-cold hardening state, good machinability;
3. The surface of
5A05 marine aluminium has no peeling, air bubbles, rough surface and local mechanical damage, and the surface of
5A05 marine aluminium has no defects;
4. Henan Chalco Industry has 6 semi-continuous casting production lines, 10 continuous casting and rolling production lines and 44 other large processing equipments, with an annual output of 450,000 tons, which provides a solid foundation for the large-scale production of
5A05 marine aluminum sheets.
5A05 Marine Aluminum Sheet - Product Specifications
|
Alloy |
Temper |
thickness（mm） |
width（mm） |
length（mm） |
Typical product |
|
5A05 Marine Aluminum Sheet |
O,H12,H14,
H16,H18,H19,
H22,H24,H26,
H28,H32,H34
H36,H38,H111,
H112,H114,H 116,H321 |
0.15-600 |
20-2600 |
500-16000 |
Ship traffic vehicles, sheet metal parts, fuel tanks, flanges, etc. |
